Checker photometer for nitrite HR (0-150 ppm)

HI708 Details:

Ideal for marine, salt and fresh water aquariums, along with environmental, water quality and wastewater testing.

The HI-708 Checker is a simple, accurate, and cost effective way to measure high ranges of nitrite.

•  0 to 150ppm
•  Ideal for aquariums
•  Nitrite

Ideal for marine, salt and fresh water aquariums

The HI-708 Checker is a simple, accurate, and cost effective way to measure high ranges of nitrite

Designed as a more accurate alternative to chemical test kits, the HI 708 provides quick, accurate results in four easy steps (see below).

The HI-708 uses an adaptation of the Ferrous Sulphate method. The reaction between nitrite and the reagent causes a greenish/brown tint in the sample.

Also ideal for:

• Water Quality
• Education
• Aquariums (marine, salt and fresh water)
• Wastewater
• Environmental

Features:

• Small palm-sized design
• Accurate from ±3 ppm ±5% of reading
• Dedicated to a single parameter
• Uses a single AAA battery
• Auto Power Off after 10 minutes in inactivity
• Built-in timer for timed reaction readings

Order Information:

The HI-708 Checker is supplied with:

• 2 cuvettes and caps
• reagent starter kit (6 packets of reagent) - re-ordering information HI-708-25
• 1 X 1.5X AAA battery
• Instruction manual

Aquarium use

The checker is useful for initial measurements of nitrite when trying to establish good ammonia/nitrite/nitrate control. Suitable for all types of aquaculture, the ultimate aim is to decrease nitrite levels so that the low range of ultra-range nitrite checker can be used for optimum tank health.

Nitrite can lead to tissue damage, illness and death of aquatic life, so regular checks can help aquarists identify rising nitrite levels before fish begin to suffer.

Four steps. One click. Instant Readout.

  1. ‘Zero’ the Checker®HC with your vial & 10ml water sample inside

  2. Take the vial out and add your reagent

  3. Place your vial into your Checker®HC

  4. Press the button and read the results

 

Use Calibration Check Set HI-708-11 with the HI-708 Nitrite High Range Checker®HC.

Use reagents HI-708-25 with the HI-708 Nitrite High Range Checker®HC, 25 tests.

Range		0 to 150 ppm
Resolution		1 ppm
Accuracy @ 25°C		±3 ppm ±5% of reading
Light source		LED @ 575 nm
Light Detector		Silicon photocell
Method		Adaptation of the Ferrous Sulphate method
Environment		0 to 50°C; RH max 95% non-condensing
Battery Type		(1) 1.5V AAA
Auto-off		After ten minutes of non-use
Dimensions		81.5mm x 61mm x 37.5mm
Weight		64g
Ordering Information		HI-708 Checker® is supplied with (2) sample cuvettes with caps, nitrite HR reagent starter kit for 6 tests (6 powder reagent packets), battery, instructions and quick start guide.

HI708-11 Details:

HI708-25 Details: