NeaterHeater PRO - Magnetic Heater Organizer

What's in the box:

• Neater Heater

●        2 – ModMag Mega

●        2 – ModMag Expansion Adapters

●        Glass-gripper silicone cover

BURSTS: 

●        Holds two glass or titanium heaters

●        Two Magnet Sets Included

●        Ultrasonically-sealed, No-rust magnets

●        Lifetime Warranty!

KEY BULLETS:

●        Magnetically attached, dual magnet, dual heater mounting system

●        Works with nearly all glass and titanium aquarium heaters

●        Supports dual heaters for ideal redundancy

●        Holds securely on glass and acrylic up to 0.5” (13mm)

●        Accommodates heaters from 0.5” – 1” diameter (13-26mm)

●        Silicone construction withstands continuous direct heat

●        Uses patent-pending Slide-Loc® technology -- no thumbscrews to get stuck or damage heaters

●        Double-sealed, ultrasonically welded ModMag magnets are the safest magnet on the market, no more worries about rusted magnets that might pollute your system

●        Shake-test feature confirms magnet seal has not been compromised

●        No thumbscrews to get stuck or damage heaters - uses patent-pending Slide-Loc® technology

●        ModMag system enables other accessories to be added to the same magnet set (i.e. the AvidRail, Wyze Camera mount, or other DIY and 3rd party accessories)

●        Lifetime Warranty!

SPECIFICATIONS:

●        In tank dimensions L x H x D = 7.32 x 3.54 x 2.28” (186 x 90 x 58mm)

●        Capacity up to 2 heaters (suggested 180 gal. rated or larger)

●        For glass & acrylic thickness 0.5” (13mm) or less (Additional magnet available in the accessory line for added strength)

SIZING GUIDE: 

Size	Suggested Heater Length	Heater Diameter	Mounting Capacity	Glass Thickness
NeaterHeater	Up to 175 gal	0.5” to 1”	Holds 2 heaters	3/8” (10mm) or less
NeaterHeater Pro	Over 180 gal	0.5” to 1”	Holds 2 heaters	1/2” (13mm) or less

SHORT DESCRIPTION:

Let’s face it, suction cups. . . suck! Toss them! Because now you have the NeaterHeater Pro, a magnetic heater element holder for two heaters that attaches firmly to your sump or aquarium using two of our ModMag ultrasonically sealed magnets. 

Since they first hit the market, there have not been significant improvements in magnetic heater holder designs. You may think you have seen a heater mount before, but trust us, there is no comparison. Here’s why.

First, the NeaterHeater Pro ModMag attachment design removes the biggest risks present with other heater holders on the market — suction cups or shoddy magnets. One leaves your heaters loose to damage themselves or other equipment the other will inevitably get the dreaded rusted magnet that so often crashes reef tanks.

The ModMag on the NeaterHeater Pro is made from durable, inert, pliable ABS plastic that is ultrasonically welded and double-sealed against water intrusion - using no glue. The two pieces of its enclosure essentially become one when assembled and then pressure tested. And, should you ever worry that water somehow has intruded – just give them the "Shake Test". This feature of the ModMag always lets you test that your magnet is still safe and dry inside the enclosure. We are so confident in our magnet system we gave it a lifetime warranty!

Heaters mounted in the NeaterHeater Pro are firmly held in place by the patent-pending Slide-Loc® silicone system. Just slide in the heater and it's held in place with simple friction. No thumbscrews to get stuck, break off, or crack your heaters. 

With the NeaterHeater Pro you get two ModMag sets that can be joined together with the included adapters to make one stronger bar, or if you have extra long heaters, can be placed independently at each end of the heater element.

But it doesn’t stop there, the ModMag that attaches the NeaterHeater Pro are also multi-purpose. It has slots, both inside and outside the aquarium, where a full ecosystem of optional accessories can be mounted.