Mitras Lightbar 2 Deep Actinic

The Mitras Lightbar is Made in Germany and offers:

• Homogeneous, brilliant and very bright light through a balanced mix of selected high-power LEDs in natural colors (CRI> 95, white LEDs 150 lm/W)
• Maximal output power with GHL Power Balancing Technology®
• Super smooth dimming with GHL Perfect Dimming Techology®
• Uniformly wide light distribution with a LED beam angle of 120°
• Energy efficiency and long life through a sophisticated thermal management (at least 60,000 operating hours)
• If controlled by the ProfiLux Aquarium Controller: Professional light dimming, individual mix of the color spectrum and water temperature-dependent downward control (light is dimmed if water gets too warm).
• Full undimmed Lightpower when operated without ProfiLux (all LEDs light up to 100%)
• Energy saving compared with traditional lighting aprox. 50%
• Operation with safe voltage (24V)

Mounting in the tank

With the supplied stainless steel brackets, Mitras Lightbar 2 can be conveniently mounted above every tank.

If there is not enough space in the tank, a flat bracket is also available.

.

Operation Modes

Mitras Lightbar can be operated undimmed and dimmed.
If operated undimmed all LEDs will burn at 100%. There is no control needed. Activation and deactivation can be made through a simple timer.
Another option, however, is to dimm and operate the Lightbar with a ProfiLux Controller (starting version 3). All color channels can thus be dimmed independently. So all of the ProfiLux Controllers simulation programs such as sunrise and sunset, cloud simulation, thunderstorms or calendrical moon phase simulation are possible.

Operation

Depending on the configuration (see the following illustrations), you will need additional accessories to operate the Lightbar:
 

• Matching Power supply
• Mitras-LB-Splitter
• Mitras-Lightbar-ProfiLux ActiveSplitter
• Cable to ProfiLux (P3: Mitras-Lightbar-Cable-D-SUB; P4/Mini/Light: Mitras-Lightbar-Cable-RJ45)

You can find all this in our Lightbar accessories section.

It is important that the power supply you select has at least the power of the connected Lightbar.

If several Lightbars are operated together, the power supply unit must have at least the total power of all connected Lightbars.

If you want to operate up to 4 Lightbars together, you will also need a Mitras Lightbar Splitter.

If more than 4 Lightbars (up to 16) shall be operated together, you will additionally need a Mitras Lightbar-ActiveSplitter as well as corresponding Mitras-Lightbar-RJ45-Cables, to connect to the Mitras-Lightbar-ActiveSplitter.
 

Configurations

 

 

---

Recommended for Saltwater

Mid color temperature: 18500 K

7 Color Channels (dimmable via ProfiLux)

LED-Configuration per 10 cm Lightbar:

• 1x Hyperviolett 425 nm
• 1x Royal blue 455 nm
• 1x 8000 K
• 1x Deep blue 450 nm
• 4x Cree CLX6D, red 622 nm, green 530 nm und blue 472 nm
• White LEDs with 150 lm/W

 

Spectrum: All channels at 100%