Extension Mount

The Kessil Extension Mount is designed to be used with the Mounting Arm and provides customers with additional mounting option. It is designed specifically for acrylic or euro-braced tanks, by affixing the mounting arms to the tank stand. The Extension Mount comes with two extension tubes, allowing a total length of 57.5" (1.46 m). It is compatible with A160, A360, and AP700.

Weight: 1.32 lb / 600 g
Dimensions: ø 1" x H 37.8" (ø 25 mm x H 96 cm)

Scope of delivery:
2x Extension Tube
2x Coupling (pre-installed with M4 round head hex screw, L=0.2" / 5 mm)
8x M4 phillips wood screw
4x M5 thumb screw

No. of Extension Mount Sets Required for AP700

1

Insert Arm and Extension Tube(I) into Coupling(II) until they meet the slot opening. Use two M5 Thumb screws(IV) to secure both tubes.
*Mounting Arm needs to be purchased separately.

2

Insert both Extension Tubes(I) into Coupling(II) until they meet the slot opening. Use two M5 screws(IV) to secure both tubes.
*(Optional).
Longer extension requires 2 sets of Extension Mounts for AP700 setup.

3

Use four M4 Phillips Wood screws(III) to secure the Tube Adapter on wood stand. Put Extension Tube(I) into the Tube Adapter. Secure them with two M5 Thumb screws.
*Tube adapter and M5 Thumb screws are in the Mounting Arm box.

4

AP700 display
Follow steps A4 to A10 (on Mounting Arm box) to complete installation.
*Flatten the AP700 cable before fitting into the arm.

A1XX/A3XX display
Follow steps B1 to B4 (on Mounting Arm box) to complete installation.